What is the correct cleaning method?
The daily cleaning of the hot press is very important. Before cleaning the hot press, the staff should prepare cleaning tools and turn off the power of the equipment. The surface of the hot press plate also needs to be cleaned. Regular cleaning will extend the service life of the hot press. When cleaning, check the oil injection parts of the equipment and check whether there is oil leakage. Before production every day, it is also necessary to check whether there is any abnormality in the hot-pressing line of the veneer. First, it needs to be degreased, then degreased with kerosene, and its various parts need to be cleaned. Parts should be cleaned in order, first cleaning the main parts, and then cleaning the secondary parts. After cleaning, the various parts can not be stacked together, mainly to prevent collision phenomena.
After completing the above operations, be sure to blow it with clean compressed air or dry it with a cotton cloth, but be careful not to directly install the just-cleaned parts, otherwise the air compressor will explode.
